|
Solar Brite reflective material will enhance the output of ultraviolet lamps. Specifications are as follows:
Composition/ Structure: Multi- layered metal (enhanced aluminum)/ high performance polymeric compounds (proprietary).
Overall Thickness: 0.024” (+/- 0.004”)
Base Thickness: 0.0115” (+/- 0.0005”)
Color: Top reflector surface- Uniform Specular Silver
Bottom surface- Uniform white
Opacity: Opaque (0.00% transmission)
Beam Spread Specifications: (For top reflector surface- all UV wavelengths)
· At perpendicular (90º) to reflector surface:
0º - 40º uniform beam spread (95% of reflected beam)
· At 45º to reflector surface:
0º - 150º uniform beam spread (98% of reflected beam)
Spectral Beam Divergence: +/- 5% maximum from 0º - 80º of reflector surface (95% of reflected beam)
Convex Lens – Vertical Specification: 0.0145” (+/- 0.006”)
Convex Lens – Uniformity Specification: Continuous and uniform to within +/- 5%
Purity Specification Of Enhanced Aluminum Used: 99.999% pure
Metal Thickness Tolerance: Both metal layers are manufactured to within 1/300,00th of an inch.
Fire Resistance: Self- extinguishing
Heat Resistance: Dimensionally stable (<2% expansion/ contraction, 212º F, 30 min.)
Electrical Conductivity (as supplied): Non- conductive on both the top and bottom surfaces. However, at performance points, the internal aluminum layers, as with all metals, will conduct an electrical current.
Integrated Memory Specifications:
Crease Resistance: Minimal Effect
Bend Resistance: No Effect
Impact & Hammer Resistance: Slight Effect
Shape Retention After Impact: +95% return within 1 second.
Suggested Cutting Tools/ Methods: Razor, shears, or sharp knife (can also be efficiently slit, sheeted and die- cut using conventional processing equipment).
Suggested Cleaning Instructions: Solar Brite reflectors require little care. Dust can easily be removed with a feather duster. Everyday dirt can be usually removed using a dry, soft clean cloth with light pressure (for example, a loosely wadded cheesecloth). If heavy soiling occurs, dampen the cloth first using a solution of a mild dishwashing soap and water (non- scented). Excess moisture can then be removed using a dry, loosely wadded cheesecloth.
|
