|
|
Full Pure Filter Media
Premium grade, dual stage filter designed for environments requiring
higher levels of efficiency. The inlet layer is more open and acts as a
pre- filter layer to the densified air exiting side. Dry tackifier is
applied to the outer layer to prevent particle migration once it has
been captured. Full Pure replaces lower grade polyester medias,
fiberglass, disposable, and some pleated filters.
Maximum
Temperature -
150 degrees.
Fiber - 100% Polyester, 1" or 2" thickness
available.
UL
Rated at 900 Class 2.
Traps to 5 microns. |
|
|
ESF
Electronic Air Cleaner
What we breathe, drink, and eat have a large effect
on the quality of our lives. Indoor air pollution has been cited by many
leading health authorities as an unseen health hazard. Many claims are
being made to sell a myriad of filtration products using high voltage
force fields. Very few can compare to the efficiency levels of the ESF
polarized media technology. The ESF filtration system is designed to
retrofit into almost any air moving equipment, be it an existing or new
installation. If the building does not have an air moving system, ESF
has self-contained units, with their own fans and controls. Maintenance
on the Elite requires no tools or cleaning agents and just takes less
than one minute to replace the filter. Custom as well as standard sizes
are available. Only 1" thick, weighs about 2 Lbs., works off low
voltage, fits air handling systems as well as furnace and air
conditioning systems. |
GO TO
ESF FILTERS
ESSA
REPLACEMENT PADS
|
|
Pleated HEPA Pre-
Filters
This filter is quite popular in the FG 2200 series. It
serves as a large particulate collector before the HEPA, and can stand
alone as a filter for HVAC systems with larger CFM's. Fuller Pleated
filters accumulate the heavier, more restrictive particles at the bottom
of the pleats, leaving the sides open longer for effective filtration.
MERV 8 per ASHRAE Standard 52.2.
Moisture
Resistant 100% Synthetic Media.
Maximum
Recommended Continuous Operating Temperature:
150
degrees F.
Standard or
High Capacity, 1", 2", or 4" Thickness is
Available.
|
|
|
Fuller Pocket Filters
Fuller
Pocket Filters are constructed of an ultra fine glass fiber media. The
media is bonded to thin non- woven synthetic backing and sewn with
multiple rows of expanded stitch. The stitch is flexible to maintain
shape in changing conditions. All stitching is sealed with thermoplastic
resin to prevent any possible leakage. The header is constructed of 26
gauge galvanized steel to prevent rusting and provide rigid support to
the filter face.
The Fuller Pocket Filters offer high
efficiency filtration while maintaining low resistance to air flow.
Commercial and industrial applications include hospitals, schools,
automotive plants, oil mist collection, and fume collection.
UL 900
Class 2 Listed.
Multiple
Sizes Available
Medium to
High Efficiency per ASHRAE Standard 52.
|
|
|
|
LUWA
This filter
has proven to be cost effective and highly efficient in removing a wide
variety of contaminants from the airstreams in industrial, medical, and
office applications. This design incorporates 193 square feet of
high efficiency media within a 24"x 24"x 12" rigid frame,
significantly more than most other high efficiency filters on the market.
The extended media surface creates a very low
resistance to air flow. The low pressure drop results in lower energy
costs and longer filter life - key advantages in filter selection.
Dual direction media for front or reverse
mount installations, the ability to handle continuous air flow rates of
3000 cfm.
UL Class 2 rating.
|
|
|
High
Efficiency Particulate Arrestor
This series of filters are
our standard HEPA filters. They are available in a variety of sizes. These HEPA
filters are generally used in our sterile conditioning equipment and where
applicable in air handling units.
|
|
Back To Top
HOME / ABOUT
US / PRODUCTS / UV
AND OZONE / CONTACT US
Fuller Ultraviolet
Corporation
9416 Gulfstream Rd.
Frankfort, IL. 60423
Ph. 815-469-3301 Fax 815-469-1438
e-mail
fulleruvcorp@mindspring.com
|
